Harwood Medical Instruments PLC Harwood Medical Instruments PLC (HMI), based just outside of Birmingham, England, manufactured specialty medical instruments and sold them in market niches that were becoming increasingly competitive and price sensitive because of pressures to reduce health care costs. HMI was organized into nine divisions each run by a general manager. Over the years, HMI had grown both organically and by acquisition. Six of the divisions had been acquired by HMI within the past decade. All of HMI’s divisions sold medical products to hospitals, laboratories, and/or doctors, so the need for product quality and reliability was high. The divisions varied significantly, however, in terms of the degree to which their success depended on, for example, development of new products, efficiency of production, and/or customer service. Bonuses for division general managers were paid semi-annually. Up to the year 2009, these bonuses were calculated as 1% of division operating profits. HMI’s managing director, Andy Guthrie, had concerns though that the operating profit measure was too narrowly focused. He had been reading articles about performance measurement and decided to a “more balanced” scorecard. In November 2009, just before introducing a new bonus plan, Mr. Guthrie explained to his chief financial officer that he was willing to pay out higher bonuses than had been paid historically if improved performance warranted doing so. The new plan provided a base bonus for division general managers of 1% of division operating profits for the half-year period. This base bonus was adjusted as follows: • Increased by £5,000 if over 99% of deliveries were on time; by £2,000 if 95-99% of deliveries were on time; or by zero is less than 95% of deliveries were on time. • Increased by £5,000 if sales returns were less than or equal to1% of sales, or decreased by 50% of the excess of sales returns over 1% of sales. • Increased by £1,000 for every patent application filed with the UK Intellectual Property Office. • Reduced by the excess of scrap and rework costs over 1% of operating profit. • Reduced by £5,000 if average customer satisfaction ratings were below 90%. If the bonus calculation resulted in a negative amount for a particular period, the manager received no bonus. Negative amounts were not carried forward to the next period. Exhibit 1 shows results for two representative HMI divisions for the year 2010, the first year under the new bonus plan. The Surgical Instruments Division (SID), one of HMI’s original businesses, sold a variety of surgical instruments, including scissors, scalpels, retractors, and clamps. The markets for these products were mature, so growth was relatively slow. Not much innovation was needed, but controlling costs was critical. The Ultrasound Diagnostic Equipment Division (Ultrasound), which was acquired in 2007, sold and serviced ultrasound probes, transducers, and diagnostic imaging systems. The ultrasound market promised excellent growth and profits if the division could keep its sophisticated products on the cutting edge technologically and control both product development and product costs effectively. In 2009, the total annual bonuses for the year earned by the managers of SID and Ultrasound were approximately £85,000 and £74,000, respectively. Exhibit 1 Harwood Medical Instruments PLC Operating results for the surgical Instruments and Ultrasound Diagnostic Equipment Divisions, 2010 (£ in 000s) Surgical Instruments Division Ultrasound Diagnostic Equipment Division 1st half of 2010 2nd half of 2010 1st half of 2010 2nd half of 2010 Sales £42,000 £44,000 £28,600 £29,000 Operating profit £4,620 £4,400 £3,420 £4,060 On-time deliveries 95.4% 97.3% 98.2% 94.6% Sales returns £450 £420 £291 £289 Patent applications filed 0 1 4 8 Scrap and rework costs £51.1 £45.0 £39.7 £28.2 Customer satisfaction (average) 78% 89% 81% 91% Assignment Questions 1. Explain why the performance measurement system used to award bonuses up to the year 2009 does not provide a more balanced approach? Relate your answer to the context of the firm.